View Single Post
Old March 20, 2013, 03:27 PM   #15
newfrontier45
Junior member
 
Join Date: February 23, 2012
Posts: 921
RalphS has nailed it. If you have never even shot a .44Mag, you don't need a .454. Lots of folks like to quote the USFA study that was done back in the `80's and conclude that the .44Mag (and .45-70) are poor bear stoppers but that the 220gr .30-06 is king. If you consider the poor loads they used for testing, this is true. Step up to proper loads in both and you have two cartridges that do a better job than the 220gr .30-06 (Remington CorLokt) they used in their tests. That would be a good 320-355gr LBT in the .44Mag and a 420-500gr in the .45-70. Forget the .454, it's a lot of pressure and recoil that produces a lot of velocity but practically, only serves to flatten trajectory. Same for the .460 and .500S&W. They are more difficult cartridges to master and won't yield you any gain. You're already against the wall just starting out with the .44Mag. Although the .480Ruger is a very practical cartridge, it's probably still a little more than you need right now.

Shotgun slugs are pitiful.


Quote:
If it were me in AK for 6mo, I'd get a S&W Gov revolver. It fires .45acp .45LC & .410 shotshell....For a semi auto, I'd seriously consider a Glock 20 10mm with the Guncrafters Industry .50GI kit.
You can handle bears, wolves, critters & ___er
I would recommend against both the Governor and the .50GI. The .410 is useless for such purposes and the Governor is not a very good general purpose woods gun. It's not strong enough for appropriate .45Colt loads. Poor choice. The .50GI is a very moderate big bore that does not utilize heavy enough bullets for bear duty. You'd be better off with the 10mm and 220gr loads from DoubleTap.
newfrontier45 is offline  
 
Page generated in 0.03356 seconds with 8 queries