The Firing Line Forums - View Single Post - Whats A Good Way To Remove Lee Liquid Alox From Your Loaded Ammo

80viking · September 5, 2012, 11:01 PM

Thanks all.
Thats a ton of info.

For the bullets I have lubed and ready to load, I will try some corn starch or baby powder. Then I will try the 45/45/10 mix on the next batch.

The Johnsons Wax added to get rid of sticky reminds me of using laminating resin for fiberglass boat building or repairing. Laminating resin remains sticky long after it is cured so that it will accept another layer. On the last layer of resin you add some shavings from a block of paraffin and no more sticky, it cures hard and shiny.

John

September 5, 2012, 11:01 PM	#15
80viking Senior Member Join Date: December 8, 2009 Location: The Peoples Republic of Massac Posts: 333	Thanks all. Thats a ton of info. For the bullets I have lubed and ready to load, I will try some corn starch or baby powder. Then I will try the 45/45/10 mix on the next batch. The Johnsons Wax added to get rid of sticky reminds me of using laminating resin for fiberglass boat building or repairing. Laminating resin remains sticky long after it is cured so that it will accept another layer. On the last layer of resin you add some shavings from a block of paraffin and no more sticky, it cures hard and shiny. John