The Firing Line Forums - View Single Post

Forrest68 · June 20, 2013, 06:38 PM

Hello all,

I am fairly new to all this basically self taught(which means I've read and watchen about 1000 hours worth of vidoes and articles. I have teh Lyman 49th edition. and teh lee data sheets plus hodgdon data, but have a problem finden load data on plated bullets both 115gr 9mm and 180gr .40 cal. after tons of searchen found a starting point for the 9mm and after a few tries found a decsent load for the HP38(guess it would help to tell you the powder I'm useing, lol) I also have a fair amount of titegroup.

My question is does anyone know what starting point would be good for these plated 180gr bullets with either HP38 or Titegroup.

Thank for any and all help

June 20, 2013, 06:38 PM	#1
Forrest68 Senior Member Join Date: June 19, 2013 Posts: 135	Load info Hello all, I am fairly new to all this basically self taught(which means I've read and watchen about 1000 hours worth of vidoes and articles. I have teh Lyman 49th edition. and teh lee data sheets plus hodgdon data, but have a problem finden load data on plated bullets both 115gr 9mm and 180gr .40 cal. after tons of searchen found a starting point for the 9mm and after a few tries found a decsent load for the HP38(guess it would help to tell you the powder I'm useing, lol) I also have a fair amount of titegroup. My question is does anyone know what starting point would be good for these plated 180gr bullets with either HP38 or Titegroup. Thank for any and all help Last edited by Forrest68; June 20, 2013 at 08:15 PM.