The Firing Line Forums - View Single Post

38Mike · May 13, 2013, 08:47 AM

Mornin' folks,

I've got a S&W 360 which has the black scandium frame and black magic marker finish on cylinder; through my abuse/ neglect, some of the cylinder finished has rubbed off. This is my carry gun, all is well, function isn't affected at all. I was wondering if there are any "do it yourself", "home remedy" solutions available to refinish just the cylinder in a flat black to match the frame. I use Breakfree CLP to clean/ lube if that matters..

Anys ideas, thoughts would be much appreciated. Again, this is not much of a high priority, just something I'm thinking about doing....

thanks

Mike

May 13, 2013, 08:47 AM	#1
38Mike Senior Member Join Date: October 17, 2000 Location: Wichita, Ks. Posts: 426	cylinder refinish suggestions please... Mornin' folks, I've got a S&W 360 which has the black scandium frame and black magic marker finish on cylinder; through my abuse/ neglect, some of the cylinder finished has rubbed off. This is my carry gun, all is well, function isn't affected at all. I was wondering if there are any "do it yourself", "home remedy" solutions available to refinish just the cylinder in a flat black to match the frame. I use Breakfree CLP to clean/ lube if that matters.. Anys ideas, thoughts would be much appreciated. Again, this is not much of a high priority, just something I'm thinking about doing.... thanks Mike