I have no threaded rings- but Rob on AR is making them
as well as complete cases. Pm him there.
AR is acuratereloading.com, and you go to the BIG BORE
section of the forums.
That is the barrel we use and we use a 1 to 20-22 twiist,
other barrels used are smooth ones and the rifled ones on
the NEF as they come from the factory.
1 to 22 twist stabilizes anything we use even super heavy
slugs. You can start with a NEF Ultra slig and ream chamber
for longer plastic and brass cases to get in recoil business.
Here is a novel slug idea, hard plastic support ring on
the front, and a locked base ring/seal. Metal never
touches the bores. Work in great rifled and good in
smooth barrels. These are steel, lead/copper would do
great also.Could be made heavier and different points.
Flat point shown would do great damage to game.
On the net- ammunitiontogo.com
This one is about 500 gr.
Second picture is the 499HE to use in redoing the 500S&W,
shown on the also, in single shots, etc,for those wanting
much more power at 40-50% lower pressures.Ed
