View Single Post
Old June 20, 2007, 10:12 AM   #2
HankL
Senior Member
 
Join Date: March 11, 1999
Location: The Sunny South
Posts: 2,174
The trim die is a full length reloading die. Back the trimmer motor out of the way and set up the die like you would any other f/l sizing die. Case lube will not let the case spin in the die and if you don't use it you will end up sticking a case in the die.

Once you have the sizing part set lock the die in the press and adjust the trimmer motor down until you are getting cases trimmed to the correct length.

hth

Hank
__________________
Check 6
HankL is offline  
 
Page generated in 0.03835 seconds with 8 queries