Quote:
Yes, don't shoot that ammo
|
Exactly!
Unclenick - thanks for all the info. I took it apart yesterday and checked the ejector. It is fit to the frame very well with no gap and no movement. At least that's not an issue. I'm not real clear on the angle of the ejector. If I mount the ejector in a vise and look at it from the side, the plane of the original angle is 90 degrees. Would I change that to maybe 88?
I also noticed something else during disassembly. The barrel is a 4" bull type as no bushing is used. With the slide locked forward, the barrel is resting against the lower right quadrant when looking at the muzzle. The gun shoots to the lower left which I believe is due to this. I haven't put it back together yet but will measure the gap at the opposite side to see how much I have. I would think the barrel would be better floating or being supported equally around instead of being angled at one side.