View Single Post
Old June 20, 2013, 08:36 PM   #2
BigD_in_FL
Junior member
 
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
Bottom pins are notorious for getting worn down before the top ones. Another thing to consider , if reloading, are the primers being used. Nobelsports are bad for having the cups being seated .001-.002 too deep resulting in light strikes. If BOTH pins are light-striking, try flushing with a good cleaner like brake cleaner (don't forget to relube after). If that still doesn't work new pins and springs may be needed. My Browning needed new pins, springs and main springs at 90,000. Now at almost 300,000, everything is still going strong
BigD_in_FL is offline  
 
Page generated in 0.02255 seconds with 8 queries