The Firing Line Forums - View Single Post

TPD211 · November 20, 2013, 10:49 AM

I reload for 40 S&W and tried some of my 200 grain swc in the Pitbull without success. I loaded them long for my semi auto due to the powder I used, HS-6, which filled the case and made a compressed load.
I just bought some Titegroup and loaded some rounds.
Good news is that Titegroup takes half of what HS-6 required at 3.5 grains.
I was able to load the 200 grains swc with no problems and seat them to the proper depth so they fit in the cylinder and seat properly.

November 20, 2013, 10:49 AM	#86
TPD211 Member Join Date: July 30, 2009 Location: Sucky Florida Posts: 28	I reload for 40 S&W and tried some of my 200 grain swc in the Pitbull without success. I loaded them long for my semi auto due to the powder I used, HS-6, which filled the case and made a compressed load. I just bought some Titegroup and loaded some rounds. Good news is that Titegroup takes half of what HS-6 required at 3.5 grains. I was able to load the 200 grains swc with no problems and seat them to the proper depth so they fit in the cylinder and seat properly.