View Single Post
Old February 26, 2013, 08:16 AM   #9
Misssissippi Dave
Senior Member
 
Join Date: December 5, 2009
Posts: 1,411
I have used AA2 with a 115 grain JHP bullet in 9 mm. My OAL was 1.080" This is shorter than you would use for a FMJ. 4.0 grains wouldn't cycle my pistols. 4.2 grains would if you kept a very good solid grip on them. It took 4.4 grains of powder to cycle properly. I prefer using AA5 powder in 9 mm of the two powders you mention.
Misssissippi Dave is offline  
 
Page generated in 0.02038 seconds with 8 queries