The Firing Line Forums - View Single Post - Which Press to get and where to buy components?

WINTERVILLE WILL · June 15, 2000, 10:45 AM

Mr. Moderator...if you can't make the Lee lock rings work, either you haven't read the instructions or just aren't doing it correctly! When adjusted correctly and TIGHTENED DOWN, Lee dies will not move. To remove them from the press, move the die by the RING ONLY. Your settings will not be disturbed.I never have figured out how a die will move under normal loading conditions anyway. Lee makes the best finished, easiest to use dies in the business IMHO.

June 15, 2000, 10:45 AM	#5
WINTERVILLE WILL Member Join Date: April 6, 2000 Location: Winterville, Ga. USA Posts: 50	Mr. Moderator...if you can't make the Lee lock rings work, either you haven't read the instructions or just aren't doing it correctly! When adjusted correctly and TIGHTENED DOWN, Lee dies will not move. To remove them from the press, move the die by the RING ONLY. Your settings will not be disturbed.I never have figured out how a die will move under normal loading conditions anyway. Lee makes the best finished, easiest to use dies in the business IMHO.