The Firing Line Forums - View Single Post

Big Yac · May 3, 2005, 12:43 AM

I do know the bench top is nice and strong, I used several pieces of the 3/4" plywood we had here and put them together(the top measures 8' x 3' which should give me plenty of room) I am going to agree with Edward and wait until I have the RC to drill the holes and all. And yes Sturm I am atleast getting the Redding profile crimp die for my .454 Casull loads since I hear they make a really nice tight crimp....which is what that caliber needs. Also I'm going to use a piece of Marlite on top of the bench. I'll post a picture or two when its all done. I'm excited

May 3, 2005, 12:43 AM	#6
Big Yac Senior Member Join Date: April 23, 2005 Location: Ohio Posts: 422	I do know the bench top is nice and strong, I used several pieces of the 3/4" plywood we had here and put them together(the top measures 8' x 3' which should give me plenty of room) I am going to agree with Edward and wait until I have the RC to drill the holes and all. And yes Sturm I am atleast getting the Redding profile crimp die for my .454 Casull loads since I hear they make a really nice tight crimp....which is what that caliber needs. Also I'm going to use a piece of Marlite on top of the bench. I'll post a picture or two when its all done. I'm excited __________________ "...and that's the bottom line, because Big Yac said so."