The Firing Line Forums - View Single Post - RCBS Power Case Trimmer

Edward429451 · January 26, 2007, 12:13 PM

Try adjusting the motor to put pressure on the springs, then cinch them down.

Warning! When you get up & running, keep checking the handle hold down bolt, it likes to work loose and will strip the aluminum threads easily. Ask me how I know.

That unit takes a wee bit of getting used to. At first, practice on reject brass instead of your good stuff. Once you're set up and have a perfectly trimmed case, save one for fast setup in the future. Toss it in the die box.

January 26, 2007, 12:13 PM	#2
Edward429451 Junior member Join Date: November 12, 2000 Location: Colorado Springs, Colorado Posts: 9,494	Try adjusting the motor to put pressure on the springs, then cinch them down. Warning! When you get up & running, keep checking the handle hold down bolt, it likes to work loose and will strip the aluminum threads easily. Ask me how I know. That unit takes a wee bit of getting used to. At first, practice on reject brass instead of your good stuff. Once you're set up and have a perfectly trimmed case, save one for fast setup in the future. Toss it in the die box.