View Single Post
Old October 30, 2001, 10:45 AM   #4
NG Bruce
Member
 
Join Date: February 2, 2001
Location: Beaufort County NC
Posts: 51
I agree with Paul B, first thing to do with new brass is ensure the necks are round (a neck sizing die is useful here). I also check the overall length because it does vary. I learned this lesson by loading some virgin 38/40 brass that ended up being too long for the chambers in my cylinder. NG Bruce
NG Bruce is offline  
 
Page generated in 0.03714 seconds with 8 queries