View Single Post
Old May 4, 2012, 04:07 PM   #2
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
The first problem is either a broken trigger or the half cock and safety notches on the hammer are worn or broken. That is often the result of too light a pull so the finger does not have to pull hard enough for the trigger to clear the notches.

The bolt might be a separate issue or the hammer could be worn in that area also. It sounds like the gun needs an overhaul; if you choose to do it yourself and have little experience, I suggest you buy Kuhnhausen's book on the Single Action.

Jim
James K is offline  
 
Page generated in 0.02463 seconds with 8 queries