View Single Post
Old April 10, 2012, 11:01 PM   #1
SixGun45
Junior Member
 
Join Date: April 10, 2012
Location: Tacoma, WA
Posts: 2
Gravel pit brass,223

I consider it a good thing to get free brass by the bucket even if it comes from gravel pits. I sort and wash all of it before working with it. The question is, a lot of the 223 brass has slight dings in it, would you reload and use it? I have been and have not had any problems. If it is more than a minor ding I toss it. I have a 5 gallon bucket full of brass that is going to the recyclers tomorrow. Also when I size the brass some of the necks are too small for the pilot point. I found that a 7/32" drill is 5.56mm so I put it in the vise and chuck the brass lightly in my 1/2" drill and with a little lube turn the brass onto the butt of the drill and it works fine... Thanks,
SixGun45 is offline  
 
Page generated in 0.02541 seconds with 8 queries