Thread: Please help!
View Single Post
Old March 2, 2009, 11:50 AM   #2
hogdogs
Staff In Memoriam
 
Join Date: October 31, 2007
Location: Western Florida panhandle
Posts: 11,069
http://www.sears.com/shc/s/p_10153_1...0070921x00003a
Tool to use...
I also suggest several minutes to several days with PB Blaster sprayed on the area both inside the receiver and from front...
http://blasterchemical.com/display.cfm?p=50003&pid=4
Available at any auto parts house... 2-3 times the price of WD-40 but a tiny burst is plenty and will last most folks longer then the propellant at which time I pierce can and drain into glass jar...
a light tapping with soft white rubber mallet to receiver, sides of mag tube and from front end of tube to jostle and "ring" the metal allowing the PB to soak in...
If this fails to work I would put the receiver/mag tube in oven at 250-300 degrees, pull out and "shock" cool the tube to shrink it...
If all else fails a new tube can be bought and old one cut down and "peeled" out. But that is most risky and last ditch effort!
Once out use anti seize.
http://www.buyhardwaresupplies.com/?...Number=8058257
Also available at the auto parts house. and the bottle shown in my link will last most shade tree mechanics a lifetime so 5 lifetimes for most gun owners...
PM me if you need and I will call you and discuss in person if needed.
Brent
hogdogs is offline  
 
Page generated in 0.02317 seconds with 8 queries