The Firing Line Forums - View Single Post - Problem with Speedfeed Birdshead Pistol Grip (870), Pics Inside

Lee Lapin · July 13, 2012, 04:50 PM

Did you remove the stock bearing plate when you took off the wood stock?

See http://www.urban-armory.com/diagrams/rem870.htm, Part # 60... many plastic stocks don't require the plate to be in place and are molded to fit without it, I don't know if this is the case with the birdshead stock but it might be worth checking.

July 13, 2012, 04:50 PM	#6
Lee Lapin Senior Member Join Date: September 7, 2004 Location: SE NC Posts: 1,239	Did you remove the stock bearing plate when you took off the wood stock? See http://www.urban-armory.com/diagrams/rem870.htm, Part # 60... many plastic stocks don't require the plate to be in place and are molded to fit without it, I don't know if this is the case with the birdshead stock but it might be worth checking. __________________ Mindset - Skillset - Toolset. In that order! Attitude and skill will get you through times of no gear, better than gear will get you through times of no attitude and no skill.