The Firing Line Forums - View Single Post

James K · March 15, 2011, 12:55 PM

The takedown latch can normally be re-installed just by putting it in from the left side then twisting it so it pushes the detent down into the frame. A tool is not needed. Always remove or install it in the center (straight down) position.

Jim

March 15, 2011, 12:55 PM	#3
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	The takedown latch can normally be re-installed just by putting it in from the left side then twisting it so it pushes the detent down into the frame. A tool is not needed. Always remove or install it in the center (straight down) position. Jim