The Firing Line Forums - View Single Post

**Unclenick** · December 27, 2008, 11:07 AM

The answer should be yes. I suppose the .300 WM decapper extends too far down for the '06? It's shouldn't matter. You don't need to run all the way up over the expander; just far enough so the widest diameter on the expander passes the shoulder/neck junction on the case, then back off again. Use an inside neck lube to minimize any chance of neck distortion.

If your .30-06 Lee die is under 2 years old, I think it is on warranty and the part will be replaced free?

Another thought: If you got the yellow box .30-06 Deluxe dies set with a Lee Collet Die included, you can use its mandrel as your expander.

December 27, 2008, 11:07 AM	#3
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 21,063	The answer should be yes. I suppose the .300 WM decapper extends too far down for the '06? It's shouldn't matter. You don't need to run all the way up over the expander; just far enough so the widest diameter on the expander passes the shoulder/neck junction on the case, then back off again. Use an inside neck lube to minimize any chance of neck distortion. If your .30-06 Lee die is under 2 years old, I think it is on warranty and the part will be replaced free? Another thought: If you got the yellow box .30-06 Deluxe dies set with a Lee Collet Die included, you can use its mandrel as your expander. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle