The Firing Line Forums - View Single Post - RCBS 5-0-2 vs RCBS 750 rangemaster accuracy

Jimro · February 6, 2012, 06:46 PM

It doesn't matter if your scales read differently as long as they read consistently.

As long as the scale you are using for load development is consistent then you will be safe.

Jack O'Connor published some pretty hot loads for the 270 Winchester. It wasn't until after a friend of his got his reloading scale after Jack's death did anyone figure out that Jack's scale read about a few grains high consistently.

Jimro

February 6, 2012, 06:46 PM	#6
Jimro Senior Member Join Date: October 18, 2006 Posts: 7,097	It doesn't matter if your scales read differently as long as they read consistently. As long as the scale you are using for load development is consistent then you will be safe. Jack O'Connor published some pretty hot loads for the 270 Winchester. It wasn't until after a friend of his got his reloading scale after Jack's death did anyone figure out that Jack's scale read about a few grains high consistently. Jimro __________________ Machine guns are awesome until you have to carry one.