The Firing Line Forums - View Single Post - Ruger Single Six standard to Birds Head frame conversion

BlkHawk73 · August 15, 2009, 01:19 PM

Can buy the factory Ruger ones from Brownell's, Midway or Ruger directly. They'll need to be fitted to your grip frame and finished as they come "in the white". You'll also need to install the grip locator pin and the trigger spring retainer pin. if you have the patience and skill it's an easy conversion. If not, figure $100-125 or so for it to be fitted and finished.

August 15, 2009, 01:19 PM	#2
BlkHawk73 Senior Member Join Date: January 14, 1999 Location: Maine Posts: 756	Can buy the factory Ruger ones from Brownell's, Midway or Ruger directly. They'll need to be fitted to your grip frame and finished as they come "in the white". You'll also need to install the grip locator pin and the trigger spring retainer pin. if you have the patience and skill it's an easy conversion. If not, figure $100-125 or so for it to be fitted and finished. __________________ Shoot safe, shoot often