Reloading for 45-70
I have a 45-70 trapdoor that I reload for. Its an 1889? with the ramrod bayonet that looks like a philips screwdriver. I pour my own bullets they are 385 grain round nose made from wheel weights. The bullet is designed to be used with a gas check. I coat the bullets with Lee lubricant. I use IMR 3031 at 34 grains. Pressure is safe and it is a tack driver at 100 yards. I tried using pyrodex cartridge and was not happy with it. I had 4 squib loads out of 20. Same primers as with the IMR 3031 which had no squibs. It was real fun ramming the stuck bullet out of the barrel too. The clean up is a lot more work too.
Good shooting
Sailr_2
|