The Firing Line Forums - View Single Post - Lock N load not indexing spot on every time

Glock.45 · October 6, 2011, 12:16 AM

checked the shell plate nut. needed to loosen it with the allen wrench. then snugged it back finger tight. Same problem.

I also noted that my brass is binding up in the down stroke just before it ejects. I started helping them out by hand and that seemed to lessen the index problem.

The press has just under 400 rounds through it. I checked the index tabs at the bottom and the still look brand new.

I added grease to all the zerks. also no joy

October 6, 2011, 12:16 AM	#3
Glock.45 Member Join Date: January 23, 2010 Location: North East NH Posts: 44	checked the shell plate nut. needed to loosen it with the allen wrench. then snugged it back finger tight. Same problem. I also noted that my brass is binding up in the down stroke just before it ejects. I started helping them out by hand and that seemed to lessen the index problem. The press has just under 400 rounds through it. I checked the index tabs at the bottom and the still look brand new. I added grease to all the zerks. also no joy __________________ Support the little local shops