The Firing Line Forums - View Single Post - My shopping list. Anything I don’t need or should added?

m&p45acp10+1 · April 17, 2012, 06:29 PM

When I said manual I meant a reloading manual. Oh and since you stated you are going to cast as well give the Lyman Pistol & Revolver 3rd Edition a look. It has a section dedicated to casting. As well as tons of loads listed for cast bullets, and jacketed bullets.

The ingot mold is if you have to melt the lead from scrap, or you end up with bricks of lead too big to fit into a melting pot. You can then use a pan to melt it down and pour ingots that will fit into the melting pot. The Lee ingot mold is Less than $14 US.

April 17, 2012, 06:29 PM	#12
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,930	When I said manual I meant a reloading manual. Oh and since you stated you are going to cast as well give the Lyman Pistol & Revolver 3rd Edition a look. It has a section dedicated to casting. As well as tons of loads listed for cast bullets, and jacketed bullets. The ingot mold is if you have to melt the lead from scrap, or you end up with bricks of lead too big to fit into a melting pot. You can then use a pan to melt it down and pour ingots that will fit into the melting pot. The Lee ingot mold is Less than $14 US. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.