Thread: FEG 9mm
View Single Post
Old July 11, 2005, 03:52 PM   #6
Jack Malloy
Senior Member
 
Join Date: February 3, 2005
Posts: 791
The only thing to keep an eye out when stripping one of these or a High Power is to make sure that when you put the recoil spring guide rod back in you have it in the right direction, otherwise the spring can kink.
One simple thing to test it (in case you forget to look for which side to put the little kidney shaped lug) is that when the slide is ready to put back on the frame push the recoil spring towards the barrel.If it sticks down, you did it wrong. If it pops back straight, you did it right.
High Powers are a joy to field strip and clean compared to other designs both old and new.....
Jack Malloy is offline  
 
Page generated in 0.03707 seconds with 8 queries