The Firing Line Forums - View Single Post - Reassembled SP101

Rich Miranda · March 13, 2010, 02:11 PM

I disassembled my Ruger SP101 because I the cylinder stop had gotten stuck down and the cylinder was rotating freely (this was my fault as I had sprayed GunScrubber into the opening. It only happened briefly, but this is a carry gun so you can understand my concern...) Anyhoo, I got it all apart, cleaned it, lubed it, and reassembled it. It dry-fires fine, and seems to be 100%.

Are there other checks I should do before I actually fire it?

March 13, 2010, 02:11 PM	#1
Rich Miranda Senior Member Join Date: May 4, 2008 Location: San Antonio, not San Antone... Posts: 1,203	Reassembled SP101 - What checks are necessary? I disassembled my Ruger SP101 because I the cylinder stop had gotten stuck down and the cylinder was rotating freely (this was my fault as I had sprayed GunScrubber into the opening. It only happened briefly, but this is a carry gun so you can understand my concern...) Anyhoo, I got it all apart, cleaned it, lubed it, and reassembled it. It dry-fires fine, and seems to be 100%. Are there other checks I should do before I actually fire it? __________________ Read this!: I collect .38 Special and .357 Mag cartridges and I will PAY CASH for the headstamps I don't already have! Please PM me. Please donate blood, plasma, and platelets - people's lives literally depend on it.