The Firing Line Forums - View Single Post

CTS · February 26, 2013, 11:39 PM

I like the sounds of the 6x45. Basically take a 5.56x45 brass, run it through a .243 neck sizing die and load it with a 6mm/.243 bullet. It uses the same mag same bolt, same everything as a 5.56x45 except the barrel.

February 26, 2013, 11:39 PM	#2
CTS Senior Member Join Date: November 6, 2011 Location: NE Georgia Posts: 1,070	I like the sounds of the 6x45. Basically take a 5.56x45 brass, run it through a .243 neck sizing die and load it with a 6mm/.243 bullet. It uses the same mag same bolt, same everything as a 5.56x45 except the barrel.