The Firing Line Forums - View Single Post - Pressure problem in a 22-250 from new brass to once fired

home sick · March 28, 2010, 06:24 PM

Shot the test loads today with CCI primers, worked up to 34.4 IMR 4064 lower weight test loads had very slight soot, top load to this point 34.4 was soot free and 3/4" groups. Primers were not flattened at all even on the 34.4 loads. Thanks every one for your help on this.

March 28, 2010, 06:24 PM	#19
home sick Member Join Date: March 23, 2010 Location: Florida Posts: 31	Much better results Shot the test loads today with CCI primers, worked up to 34.4 IMR 4064 lower weight test loads had very slight soot, top load to this point 34.4 was soot free and 3/4" groups. Primers were not flattened at all even on the 34.4 loads. Thanks every one for your help on this.