The Firing Line Forums - View Single Post

Cesure · April 7, 2013, 06:34 PM

... on the exteriors of my cases all the way down to the rim. I thought that was a symptom of too little powder, but these were loaded near the max. The brass is new MagTech .32 S&W Long. I didn't size them or anneal first. The powder was Titegroup. Any good advice for staying with the same powder would be welcome.

April 7, 2013, 06:34 PM	#1
Cesure Senior Member Join Date: March 2, 2013 Posts: 132	I'm getting soot... ... on the exteriors of my cases all the way down to the rim. I thought that was a symptom of too little powder, but these were loaded near the max. The brass is new MagTech .32 S&W Long. I didn't size them or anneal first. The powder was Titegroup. Any good advice for staying with the same powder would be welcome.