The Firing Line Forums - View Single Post

geetarman · June 30, 2011, 12:53 PM

Follow the link to an aluminum sight base with integral rear sight for Buckmark.

http://www.midwayusa.com/viewproduct...tnumber=790216

Take the old base off and toss it. This sight does not use the star washers.

Locktite the base in place and you are good to go.

I have a Sig Sauer red dot on mine and my son has the same rig on his.
http://www.sigsauer.com/SigStore/Sho...&productid=286

Several manufacturers market them. I got mine from Botach. They were about $100.
I just checked and it seems they do not have them any more. You might Google them and give them a call. They may have a closeout.

Sig wants about $199 for them. You can get them a lot cheaper.
You will just have to search a little.

Once dialed in, it is just about perfect and it will not shoot loose and you can flip the thing off and use your irons.

You have a good gun. Change out the sight base and you have an almost perfect gun.

Geetarman

June 30, 2011, 12:53 PM	#4
geetarman Senior Member Join Date: November 18, 2009 Location: Arizona Posts: 3,157	Follow the link to an aluminum sight base with integral rear sight for Buckmark. http://www.midwayusa.com/viewproduct...tnumber=790216 Take the old base off and toss it. This sight does not use the star washers. Locktite the base in place and you are good to go. I have a Sig Sauer red dot on mine and my son has the same rig on his. http://www.sigsauer.com/SigStore/Sho...&productid=286 Several manufacturers market them. I got mine from Botach. They were about $100. I just checked and it seems they do not have them any more. You might Google them and give them a call. They may have a closeout. Sig wants about $199 for them. You can get them a lot cheaper. You will just have to search a little. Once dialed in, it is just about perfect and it will not shoot loose and you can flip the thing off and use your irons. You have a good gun. Change out the sight base and you have an almost perfect gun. Geetarman Last edited by geetarman; June 30, 2011 at 01:00 PM.