The Firing Line Forums - View Single Post

ex_isp · January 8, 2012, 05:44 PM

After the through clean and detail strip of the slide, I finally got to take the G22 (gen2) out again today. Problem of failure to extract remains.

It's pulling the spent cartridge back about 1/4 inch then letting go of it, leaving it in the way of the incoming fresh round. Then slide won't close.

The extractor hook and all parts are clean with minimal lube. Visibly, the extractor hook is fine. Has every bit the hook depth that my G29 has.

Thoughts?

January 8, 2012, 05:44 PM	#11
ex_isp Member Join Date: May 5, 2011 Location: Az Posts: 28	After the through clean and detail strip of the slide, I finally got to take the G22 (gen2) out again today. Problem of failure to extract remains. It's pulling the spent cartridge back about 1/4 inch then letting go of it, leaving it in the way of the incoming fresh round. Then slide won't close. The extractor hook and all parts are clean with minimal lube. Visibly, the extractor hook is fine. Has every bit the hook depth that my G29 has. Thoughts? __________________ Not having Windows on your computer is like not having bricks tied to your dogs collar. The shin bone is a device for finding furniture in a dark room.