The Firing Line Forums - View Single Post - Question: adjusting the gas system on JC Higgins/High Standard Mod 66

BSlacker · January 17, 2009, 08:57 PM

With the trigger group out look down the action bar track towards the stock and you will see the mounting piece for the stock the stock bolt is in the middle. Put the action bar in by itself and slide it all the way back and see if it hits anything.
You are on the right track with the gas setting.
Guns with the comp and varichoke are good shooters. Don't shoot steel.

January 17, 2009, 08:57 PM	#5
BSlacker Member Join Date: May 18, 2004 Location: USA Posts: 18	With the trigger group out look down the action bar track towards the stock and you will see the mounting piece for the stock the stock bolt is in the middle. Put the action bar in by itself and slide it all the way back and see if it hits anything. You are on the right track with the gas setting. Guns with the comp and varichoke are good shooters. Don't shoot steel.