View Single Post
Old November 30, 2005, 09:46 PM   #5
mbartel
Member
 
Join Date: March 15, 2005
Posts: 77
If you are using an older .444 with the Micro-Groove rifling, you will need to stay below 300 grs. of bullet weight. The slow 1 in 38 twist rate will not properly stabilize the heavier and longer bullets. The newer .444s use a more conventional land and groove arrangement and have a faster twist rate that should stabilize most if not all .429/.430 bullets.
mbartel is offline  
 
Page generated in 0.02329 seconds with 8 queries