View Single Post
Old August 17, 2013, 03:40 PM   #5
Forrest68
Senior Member
 
Join Date: June 19, 2013
Posts: 135
Most of my 9mm is loaded to a OAL of 1.125 but I have some as low as 1.065 thats ina 124gr LFN(lead flat nose) the abbreviatiosn are another learning curve. What happens when you legthen a case OAL it reduce (depending on powder charge) the pressure. 4.0gr of titegroup sounds like enough that your not going to have cycling issues, but that also depends on the pistol. On the flip side reducen the OAL will increase the pressure , I'd have to check my manuals for the OAL for that particular bullet. Hodgdon says

"115 GR. LRN Hodgdon Titegroup .356" 1.100" 3.9 1075 25,800 CUP 4.3 1151 30,500 CUP "

directly from there website , If my memory serves me correctly berrys says to load theres to lead data. Hope that helps.

Last edited by Forrest68; August 17, 2013 at 05:56 PM.
Forrest68 is offline  
 
Page generated in 0.02394 seconds with 8 queries