The Firing Line Forums - View Single Post - 1972 model 70 .25-06

jeepman · November 20, 2011, 03:07 PM

If you look closely,the screw driver is pointed at the pressure point built into the stock from the factory.forward to the end of the stock, you can see where the barrel is contacting it.from the screw driver rearward to the lug area, there is no contact between barrel and stock.

November 20, 2011, 03:07 PM	#6
jeepman Junior Member Join Date: September 16, 2011 Posts: 6	If you look closely,the screw driver is pointed at the pressure point built into the stock from the factory.forward to the end of the stock, you can see where the barrel is contacting it.from the screw driver rearward to the lug area, there is no contact between barrel and stock.