The Firing Line Forums - View Single Post - Powder measure

Crashbox · August 13, 2013, 06:28 AM

If I intend to reload the following day then I will leave it in overnight, otherwise I return it to its container. I left a bunch of TiteGroup in for considerably longer than that and it turned the smooth inside finish into a nice orange-peel type of finish...

I have three items that indicate the powder to be used: a plastic tag on the wall behind the bench, the powder container itself, and I also have a plastic tag of the powder type (printed via Brother P-Touch) which is on the powder dispenser reservoir itself, this tag will slip in nicely in the groove between the reservoir cylinder and the dispenser body.

August 13, 2013, 06:28 AM	#30
Crashbox Senior Member Join Date: November 3, 2009 Location: Lynden, Washington Posts: 199	If I intend to reload the following day then I will leave it in overnight, otherwise I return it to its container. I left a bunch of TiteGroup in for considerably longer than that and it turned the smooth inside finish into a nice orange-peel type of finish... I have three items that indicate the powder to be used: a plastic tag on the wall behind the bench, the powder container itself, and I also have a plastic tag of the powder type (printed via Brother P-Touch) which is on the powder dispenser reservoir itself, this tag will slip in nicely in the groove between the reservoir cylinder and the dispenser body. __________________ Four Rugers, three SIG Sauers, assorted rifles. NRA, GOA and SAF Life Member.