The Firing Line Forums - View Single Post

10-96 · January 15, 2013, 11:46 PM

"From the factory"- I assume you mean the Wolff factory? The standard Wolff spring is fine. The new Beretta replacement springs (from Beretta) are horrendously weak- weaker than the worn one's we were replacing.

Backstory: We had the Beretta 92D as duty weapons at my dept, and several months prior to Switching over To Sigs, we ordered a large quantity of magazine springs, mainsprings, recoil springs, firing pin springs, etc. All but the magazine springs were of good quality, but I would not recommend Beretta mag springs to anyone.

January 15, 2013, 11:46 PM	#3
10-96 Senior Member Join Date: October 19, 2005 Location: Tx Panhandle Territory Posts: 4,160	"From the factory"- I assume you mean the Wolff factory? The standard Wolff spring is fine. The new Beretta replacement springs (from Beretta) are horrendously weak- weaker than the worn one's we were replacing. Backstory: We had the Beretta 92D as duty weapons at my dept, and several months prior to Switching over To Sigs, we ordered a large quantity of magazine springs, mainsprings, recoil springs, firing pin springs, etc. All but the magazine springs were of good quality, but I would not recommend Beretta mag springs to anyone. __________________ Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two.