The Firing Line Forums - View Single Post - Used Dillon 550/650

Nukem · April 11, 2000, 03:27 PM

If it's a 650 and is in about any working condition it's worth that much for the bare press.
I load 600hr of .223 on a 650 with casefeeder without even trying. But, IMHO the magic ctg. on the 650 in the .45 acp. It will load .45 fast enough that you will keep another person busy just filling primer tubes, topping off the powder measure, bringing bullets, boxing loaded ammo and putting brass in the feeder!

April 11, 2000, 03:27 PM	#8
Nukem Senior Member Join Date: January 29, 2000 Posts: 709	If it's a 650 and is in about any working condition it's worth that much for the bare press. I load 600hr of .223 on a 650 with casefeeder without even trying. But, IMHO the magic ctg. on the 650 in the .45 acp. It will load .45 fast enough that you will keep another person busy just filling primer tubes, topping off the powder measure, bringing bullets, boxing loaded ammo and putting brass in the feeder!