View Single Post
Old August 27, 2013, 10:12 AM   #11
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
On the PPK, it is tricky, but yes. And you want to crawl under a sheet to do it, else things fly away and get lost. Hold the slide in a vise, and use a small screwdriver to push the extractor spring plunger back into the slide. Then use small pliers to pull the extractor out. To replace the extractor, put the spring and plunger in (watch which way the plunger goes). Then use the extractor itself to push the plunger back until the extractor tail snaps into the hole and the plunger snaps over the extractor.

If you mess up and spend two hours on the floor in the corner, don't blame me; I told you to use that sheet!

Jim
James K is offline  
 
Page generated in 0.02276 seconds with 8 queries