The Firing Line Forums - View Single Post

Winchester 7mm · February 11, 2014, 09:10 AM

I have loaded up some .380 for my S&W Bodyguard and I will be going to the range at lunchtime today to try it out. I used 100 gr Xtreme RNFP-CP with 3.2 grains of IMR SR-4756. I have a Lee Classic Turret Press and I used the Lee .34 Auto Disc. I will let you know how it worked later today.

Note: Back from the range and I had a couple of FTE but it is a nice and easy shooting load. I found some TiteGroup so now I will try some with that and see how it does.

hth!

February 11, 2014, 09:10 AM	#20
Winchester 7mm Member Join Date: March 4, 2009 Location: SE Wisconsin Posts: 38	I have loaded up some .380 for my S&W Bodyguard and I will be going to the range at lunchtime today to try it out. I used 100 gr Xtreme RNFP-CP with 3.2 grains of IMR SR-4756. I have a Lee Classic Turret Press and I used the Lee .34 Auto Disc. I will let you know how it worked later today. Note: Back from the range and I had a couple of FTE but it is a nice and easy shooting load. I found some TiteGroup so now I will try some with that and see how it does. hth! Last edited by Winchester 7mm; February 11, 2014 at 05:38 PM.