The Firing Line Forums - View Single Post - Gluelits--It's probably been said.

Sport45 · February 2, 2012, 02:45 AM

I've never measured a stick of glue, but read somewhere that some are cutting them to length and loading in 45 caliber cases as-is. No casting or sizing required...

Enlarging the flash hole is a must if you use glue or wax bullets in a revolver. My experience with popping primers in my Model 19 with empty cases ended with a tied up revolver. You don't have to drill it out so large that the anvil has room to escape...

February 2, 2012, 02:45 AM	#11
Sport45 Senior Member Join Date: May 25, 1999 Location: Too close to Houston Posts: 4,196	I've never measured a stick of glue, but read somewhere that some are cutting them to length and loading in 45 caliber cases as-is. No casting or sizing required... Enlarging the flash hole is a must if you use glue or wax bullets in a revolver. My experience with popping primers in my Model 19 with empty cases ended with a tied up revolver. You don't have to drill it out so large that the anvil has room to escape... __________________ Proud member of the NRA and Texas State Rifle Association. Registered and active voter.