The Firing Line Forums - View Single Post - Deep Scratches on Sides of Cases

Huck1969 · November 8, 2010, 10:13 PM

Thank you, and the scratches in those photos look just like mine. I was about to do what you decided to do with a file. Since you "filed" the feed ramps it sounds like you were able to mark a case, put it in the mag with the mark on the case in a certain position and thus determine that the scratch is (at the 6:00 position) from the area of the feed ramps. As you know my scratching is occurring at the 12:00 position so I am polishing those teeth. I will look into buying a very fine file to fix it.
Thank you

Jim H.

November 8, 2010, 10:13 PM	#7
Huck1969 Member Join Date: December 9, 2009 Posts: 28	Thank you, and the scratches in those photos look just like mine. I was about to do what you decided to do with a file. Since you "filed" the feed ramps it sounds like you were able to mark a case, put it in the mag with the mark on the case in a certain position and thus determine that the scratch is (at the 6:00 position) from the area of the feed ramps. As you know my scratching is occurring at the 12:00 position so I am polishing those teeth. I will look into buying a very fine file to fix it. Thank you Jim H. __________________ Huck Vietnam Veteran Linebacker Two