View Single Post
Old May 9, 2000, 03:43 PM   #6
zm4carbine
Junior Member
 
Join Date: May 8, 2000
Location: Northern Virginia
Posts: 1
I built one by using 2 pallets and some scrap lumber. Nail the 2 pallets together using four 2x4's to give a little space between them. I have 24 inches front to back, but you can probably get away with less. Cover up the pallets and sides with plywood or other wood. Set your box up and stake it to the ground with rebar on the corners. Now fill the box up with #57 gravel. Mine took a ton and a half to fill. You can staple your targets directly to the board, and when it gets shot up, just nail another piece over top. This whole project took me the better part of a day and cost about ten bucks, mostly for the gravel. I'm quite positive it'll stop anything I have. Hope this helps.

zm4carbine
zm4carbine is offline  
 
Page generated in 0.03484 seconds with 8 queries