The Firing Line Forums - View Single Post

BigJimP · March 31, 2014, 03:11 PM

Price it out ....see if its worth it to you / but when they cut the barrel....there is almost no chance its anything other than an open Cyclinder now..so it's not that practical as it is...

I'd call Briley in Texas...and see if they would do it.../ but you might find this is going to end up costing you around $ 250 .... ( I corrected my cost estimate to $300 or so with shipping )

March 31, 2014, 03:11 PM	#5
BigJimP Senior Member Join Date: February 23, 2005 Posts: 13,195	Price it out ....see if its worth it to you / but when they cut the barrel....there is almost no chance its anything other than an open Cyclinder now..so it's not that practical as it is... I'd call Briley in Texas...and see if they would do it.../ but you might find this is going to end up costing you around $ 250 .... ( I corrected my cost estimate to $300 or so with shipping ) Last edited by BigJimP; March 31, 2014 at 06:59 PM.