Thread: Hornaday brass
View Single Post
Old February 7, 2013, 04:53 PM   #10
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 21,019
Sounds like the form it from straight brass and they forgot the inside ream on some. Very sloppy. A tubing micrometer reading on any that are left would be revealing. The correct dimensions are here. Necks should be between 0.0115" and 0.0155" thick, so probably the usual 0.013"-0.014" in regular production.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is online now  
 
Page generated in 0.03138 seconds with 8 queries