The Firing Line Forums - View Single Post

Don P · September 9, 2012, 01:45 PM

Go with the HK. I had 2 PX4's 9mm and 40S&W both are gone now. 9mm with only 4-500 rounds through it developed the issue of not decocking from the right side of the slide with a loaded magazine in it. Drop the mag and the decocker worked as it should, put the mag in and no decock from the right side. Also with the mag in you could grip the rear of the frame wrap your fingers around the slide and pull down 1/8 of an inch. The 40 had a really bad trigger sting. Tried grease on the barrel and the sting would reappear after 2-3 magazines of shooting.

September 9, 2012, 01:45 PM	#17
Don P Senior Member Join Date: December 17, 2005 Location: Swamp dweller Posts: 6,187	Go with the HK. I had 2 PX4's 9mm and 40S&W both are gone now. 9mm with only 4-500 rounds through it developed the issue of not decocking from the right side of the slide with a loaded magazine in it. Drop the mag and the decocker worked as it should, put the mag in and no decock from the right side. Also with the mag in you could grip the rear of the frame wrap your fingers around the slide and pull down 1/8 of an inch. The 40 had a really bad trigger sting. Tried grease on the barrel and the sting would reappear after 2-3 magazines of shooting. __________________ *NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer, ICORE Range Officer, ,MAG 40 Graduate* *As you are, I once was, As I am, You will be.*