Quote:
|
IMO, bullseye is too fast for a 124gr bullet.... You are WAY overpressuring your gun! 4.6gr of bullseye is the MAX load for a 115gr bullets in my book, and as you probably know, when you use a heavier bullet, you need to use LESS powder.... ( book doesnt have a load for bullseye with 124gr bullets) Where did you get your load data?
|
Not sure where you are getting your data. The Alliant Powder Reloader's Guide clearly shows a Bullseye load for 124 grain bullet with a shorter OAL than the OP. The loading is slightly less at 4.4 gr, but with the longer length and not knowing the bullet length of the OP load, your statement might be incorrect.
A slower burn rate powder would be my choice for the bullet selected but since extraction is the issue, I'm not sure WAY overpressuring is a correct assessment.
Code:
Pistols and Revolvers
9mm Luger
124 gr Speer GDHP
Bullseye
CCI 500
Minimum OAL(inches) 1.12"
Bbl Length 4
Primer CCI 500
Powder Bullseye
Charge Weight 4.4
grains)
Velocity 1,059
(fps)