|
I have heard of a few people using the heavier work-mate to reload on. Most mount they reloading equipment on a block of 2" thick lumber or about 1" thick plywood then it is clamped to the top of the work-mate. If it is only going to be used for reloading then maybe just bolting the press through 3/4" plywood and through the wood top would work. If it move around too much add some heavy weight to the step and load on the other side. You might want to take a trip to Home Depot and see if it is possible to see one out of the box. That would probably give you a better understanding of the weight, true size and probable strength it has. I have used them for other things years ago and they did hold up better than expected.
|