The Firing Line Forums - View Single Post

M1911 · May 14, 2002, 12:04 PM

I just used some 500 or 600 grit sand paper, some oil, and a thin, flat stick. Remove the firing pin and extractor before doing so. Work slowly, stop frequently, and inspect carefully.

M1911

May 14, 2002, 12:04 PM	#5
M1911 Senior Member Join Date: March 28, 2000 Posts: 4,055	I just used some 500 or 600 grit sand paper, some oil, and a thin, flat stick. Remove the firing pin and extractor before doing so. Work slowly, stop frequently, and inspect carefully. M1911